05073681001 - 1441 SB Screw holder for screwdrivers, long bits and offset wrenches with screw retention function, 4.5-6 x 41 mm (1441)

1441 SB Screw holder for screwdrivers, long bits and angled wrenches with screw retention function

And that's how the screw holder works

In work carried out in blind holes, the screw holder moves upwards: This allows easy access to mounting objects located in deeper positions.

And that's how the screw clamp works.

The screw holder can also be used with offset wrenches and long bits!

Insertion tool with screw retention function

It securely holds screws of all types and sizes in the tool.

Suitable for round and hexagonal rods with diameters from 4.5 mm to 6.0 mm

And that's how the screw clamp works.

Place the screw holder on the tip of the screwdriver shaft, and slide it until the profile of the shaft comes out of the rubber bushing.

And that's how the screw clamp works.

Place the screw on the end of the rod so that it is held in place by the screw clamp.

And that's how the screw clamp works.

Now continue moving the entire claw a little further towards the screwdriver handle until both arms of the screw holder are engaged with the screw head and are slightly tensioned outwards.

And that's how the screw holder works

Upon contact with the surface, the gripping arms open wider and wider, and the ring that holds them moves further and further upwards on the sleeve, until finally, as soon as the screw head is almost completely inserted into the surface, the arms automatically open fully, releasing the screw.

And that's how the screw holder works

In work carried out in blind holes, the screw holder moves upwards: This allows easy access to mounting objects located in deeper positions.

And that's how the screw holder works

The screw holder can also be used with offset wrenches and long bits!

Insertion tool with screw retention function

It securely holds screws of all types and sizes in the tool.

Suitable for round and hexagonal rods with diameters from 4.5 mm to 6.0 mm

And that's how the screw holder works

Place the screw holder on the tip of the screwdriver shaft, and slide it until the profile of the shaft comes out of the rubber bushing.

Item description

The Wera screw clamp: an insert tool with a screw-holding function. It securely holds all types of screw profiles. During screw driving, the clamp can be pushed upwards along the rod. This way, the clamp doesn't get in the way, even when driving screws deep into the material.