05074810001 - 1460 ESD Kraftform Micro Torque Screwdrivers, with factory preset measuring value (0.02-0.11 Nm), with quick change system, 1461 ESD x 0.050 Nm (1460ESDMicropre-set,Halfmoon)

1460 ESD Kraftform Micro Torque Screwdrivers, with factory preset measuring value (0.02-0.11 Nm), with quick change system

The precision zone

The precision zone located directly above the rod gives the user a good feel for the correct turning angle when performing adjustment work.

The fast-turn zone

The rapid-turn zone below the rotating hood allows for ultra-fast turning movements.

Kraftform Micro ESD torque screwdriver, factory preset with quick-change system

Electrostatically safe tool thanks to a surface resistance of ≤ 109 Ohms

An audible and palpable signal is indicated when the preset tightening torque is reached.

Suitable for housing 4mm Halfmoon type and 4mm HIOS type bits

Application in, for example, smartphones, mobile phones, cameras and electronic devices

Adjustable torque screwdrivers

Wera torque screwdriver. The torque scale is factory preset to the lowest value. Suitable for applications requiring a consistently high torque value and high repeatability. The torque value can be adjusted within the measuring range using an additional tool (recalibration kit available under part number 05137004001). The adjusted value must then be verified using a standard torque measuring device.

Wera ESD Tools

The resistance requirements for ESD screwdriving tools are defined in DIN EN 61340-5-1. This standard, among other things, stipulates that the tool must have a handle made of a material with a defined electrical conductivity. Wera's ESD series products comply with this standard and also meet the even stricter standards of some technology companies.

Protection against electrostatic energy

The surface electrical resistance of Wera's ESD material is ≤ 109 ohms. This ensures that components are safely protected from electrostatic discharge and the damage that could result from it.

For Halfmoon and HIOS tips

Thanks to its combined bit holder, the tools can accommodate Halfmoon and HIOS type drive bits.

The power zone

The force zone, with its integrated soft areas near the tip of the rod, allows the transmission of high loosening and tightening torques without losing contact with the screw.

The precision zone

The precision zone located directly above the rod gives the user a good feel for the correct turning angle when performing adjustment work.

The fast-turn zone

The rapid-turn zone below the rotating hood allows for ultra-fast turning movements.

Kraftform Micro ESD torque screwdriver, factory preset with quick-change system

Electrostatically safe tool thanks to a surface resistance of ≤ 109 Ohms

An audible and palpable signal is indicated when the preset tightening torque is reached.

Suitable for housing 4 mm Halfmoon type and 4 mm HIOS type bits

Application in, for example, smartphones, mobile phones, cameras and electronic devices

Adjustable torque screwdrivers

Wera torque screwdriver. The torque scale is factory preset to the lowest value. Suitable for applications requiring a consistently high torque value and high repeatability. The torque value can be adjusted within the measuring range using an additional tool (recalibration kit available under part number 05137004001). The adjusted value must then be verified using a standard torque measuring device.

Item description

With a factory-set torque value at the lowest setting on the scale. Suitable for all applications requiring a consistently constant torque value and high repeatability. The tightening torque value can be adjusted within the measuring range using the additional tool 05137004001. The set value must then be verified using a standard torque measuring device. It features a compact system of interchangeable handles and shafts for precise work on bolted connections requiring torque control. The Kraftform Micro ESD torque screwdriver is ideal for torque-controlled bolted connections on components with an electrostatic risk. It is suitable for 4 mm Halfmoon drive bits (Wera 9 series) and 4 mm HIOS drive bits (Wera 21 series). It includes a tamper-evident cap. Upon reaching the preset torque, a clear over-tightening is audible and tactile. Repeatability is 100% guaranteed. The manual loosening torque is unlimited. The surface resistance is ≤ 109 ohms for reliable protection against electrostatic discharge. It has been manufactured according to DIN EN 61340-5-1. The interchangeable handle and shaft system allows for ultra-fast shaft changes. The Kraftform Micro handle features a rotating cap and a quick-turn zone, enabling extremely fast rotation without changing grips, thus saving considerable time. A power zone with integrated soft zones allows for very high torque transmission for tightening and loosening. Directly above the shaft is a precision zone for achieving the correct turning angle during adjustment work. The bits can be attached incredibly quickly: simply insert the bit into the tool holder, the self-locking mechanism engages automatically, and the bit is securely held in place. To change the bit, simply slide the sleeve forward and then remove the bit. The free-running sleeve allows for easy tool guidance during screwdriving. The bits are suitable for both manual and mechanical work with electric screwdrivers (including those from HIOS, Delvo, and Sehan). The screwdriver is ideal for use on, for example, smartphones, mobile phones, cameras, and other electronic devices, as well as in dental laboratories and clinics.

Please note: 1 Ncm = 0.01 Nm.