05135234001 - 867/9 C IP TORX PLUS® bits, 8 IP x 44 mm (867/9 C TORX PLUS®)

867/9 C IP TORX PLUS® Bits

TORX PLUS®

Compared to the "standard" TORX® profile, the widening of the six flanks that transmit torque between the tool and the screw is achieved through an elliptical, rather than circular, construction. This distributes the force applied during tightening over larger surfaces, resulting in higher torque transmission and increased tool and screw lifespan. A typical application of this profile is in screws for carbide inserts used in machining. Due to stress and temperature changes, these fastening screws often seize with heat, significantly increasing their loosening torque. Therefore, a more stable screw profile is needed in terms of torque to prevent potential screw failure and, consequently, costly machine downtime.

With 4mm Halfmoon type drag

Halfmoon, 4mm, Wera Series 9. Feed: For direct feed on machine. Machine: Delvo, Densei, etc.

For internal TORX PLUS® screws

Hard version

4mm Halfmoon type drive (Wera 9 connection series)

For direct machine connection

TORX PLUS®

Compared to the "standard" TORX® profile, the widening of the six flanks that transmit torque between the tool and the screw is achieved through an elliptical, rather than circular, construction. This distributes the force applied during tightening over larger surfaces, resulting in higher torque transmission and increased tool and screw lifespan. A typical application of this profile is in screws for carbide inserts used in machining. Due to stress and temperature changes, these fastening screws often seize with heat, significantly increasing their loosening torque. Therefore, a more stable screw profile is needed in terms of torque to prevent potential screw failure and, consequently, costly machine downtime.

With 4mm Halfmoon type drag

Halfmoon, 4mm, Wera Series 9. Feed: For direct feed on machine. Machine: Delvo, Densei, etc.

For internal TORX PLUS® screws

Hard version

4mm Halfmoon type drive (Wera 9 connection series)

For direct machine connection

TORX PLUS®

Compared to the "standard" TORX® profile, the widening of the six flanks that transmit torque between the tool and the screw is achieved through an elliptical, rather than circular, construction. This distributes the force applied during tightening over larger surfaces, resulting in higher torque transmission and increased tool and screw lifespan. A typical application of this profile is in screws for carbide inserts used in machining. Due to stress and temperature changes, these fastening screws often seize with heat, significantly increasing their loosening torque. Therefore, a more stable screw profile is needed in terms of torque to prevent potential screw failure and, consequently, costly machine downtime.

Item description

Hard bits for internal TORX PLUS® screws. Drive: 4 mm Halfmoon type for direct connection to the machine.