05150104001 - 9713 Foam Reservoir Hex Screwdriver Set 1, 12 Pieces (9713 Foam Reservoir Hex Screwdriver Set 1, 12 Pieces)

9713 Foam Reservoir Hex Screwdriver Set 1, 12 Pieces

Hollow Shank Socket Wrench Screwdriver

Screwdrivers with hollow shafts are very useful when working on threaded bolts because the threaded bolt can penetrate the empty shaft of the screwdriver, allowing the screw nut to be tightened.

Kraftform Micro Screwdriver

Kraftform Micro screwdrivers, with their power, fast-turning, and precision zones, perfectly meet all the requirements for fine mechanical work on screw connections. The smooth-running capsule, which provides a comfortable grip, ideally supports these advantages.

A long-lasting foam reservoir; with a two-tone design so that the absence of a tool is noticed very quickly.

High-quality, long-lasting foam tank without chemical evaporation

A perfect fit to facilitate and optimize the removal of the tool from the foam containers

Water and oil repellent, easy to care for and clean

The tool is protected against dirt and impacts.

4 Kraftform Plus screwdrivers with hard zones for high working speeds, and with soft handle zones that guarantee high torque transmission; 2 of them have a hollow shaft for protruding bolts

3 Kraftform Micro screwdrivers with rotating capsule for rapid turning movement

5 T-handle screwdrivers for transmitting particularly high tightening and loosening torques, with internal hexagon screw clamping function.

With Hex-Plus profile (prevents rounding due to wear of internal hexagon screws)

Width x height x depth: without tools 344 x 30 x 392 mm, with tools 344 x 45 x 392 mm

A safe accommodation and a tidy structure at first glance

The tools rest securely on the foam, thanks to the precise contour cuts. The intelligent tool placement allows for economical storage and quick access to the right tool.

Two-tone foam tank

After removing the tool, the second layer of light gray foam becomes visible. This allows for quick identification of the necessary tools.

The Black Point type black tip

The Black Point type black tip, as well as a sophisticated hardening process, guarantees a long tip lifespan, greater corrosion protection, and an extremely precise fit on the screw.

T-handle screwdriver with internal hexagon screw holding function

The internal hex screw is held securely at the end of the tool by a spring-loaded ball. This is especially useful when working in hard-to-reach assembly environments where it's not possible to use the other hand to hold the screw.

Second arm

The short additional arm that extends from the side of the handle allows the transmission of extremely high torques, as the long arm is used as a lever.

High tightening torques

Thanks to the arm position when using this tool, the rod's axis forms an extension of the forearm's axis. This allows for particularly high tightening torques.

Hollow Shank Socket Wrench Screwdriver

Screwdrivers with hollow shafts are very useful when working on threaded bolts because the threaded bolt can penetrate the empty shaft of the screwdriver, allowing the screw nut to be tightened.

Kraftform Micro Screwdriver

Kraftform Micro screwdrivers, with their power, fast-turning, and precision zones, perfectly meet all the requirements for fine mechanical work on screw connections. The smooth-running capsule, which provides a comfortable grip, ideally supports these advantages.

A long-lasting foam reservoir; with a two-tone design so that the absence of a tool is noticed very quickly.

High-quality, long-lasting foam tank without chemical evaporation

A perfect fit to facilitate and optimize the removal of the tool from the foam containers

Water and oil repellent, easy to care for and clean

The tool is protected against dirt and impacts.

4 Kraftform Plus screwdrivers with hard zones for high working speeds, and with soft handle zones that guarantee high torque transmission; 2 of them have a hollow shaft for protruding bolts

3 Kraftform Micro screwdrivers with rotating capsule for rapid turning movement

5 T-handle screwdrivers for transmitting particularly high tightening and loosening torques, with internal hexagon screw clamping function.

With Hex-Plus profile (prevents rounding due to wear of internal hexagon screws)

Width x height x depth: without tools 344 x 30 x 392 mm, with tools 344 x 45 x 392 mm

A safe accommodation and a tidy structure at first glance

The tools rest securely on the foam, thanks to the precise contour cuts. The intelligent tool placement allows for economical storage and quick access to the right tool.

Item description

A long-lasting foam reservoir; the two-tone appearance makes it very easy to recognize if parts are needed; it is suitable for the Tool Rebel workshop tool trolley; it comes with 10 Wera screwdrivers (workshop, micro and T-handle) for internal hex screws, and 2 Wera hollow shank screwdrivers for external hex screws.