Kraftform Kompakt VDE 64 i SB, 4 x 154 mm (KK VDE 64 i SB)

Kraftform Kompakt VDE 17 extra slim 1, 17 pieces

Kraftform Kompakt VDE

The "one handle - many interchangeable shafts" system makes Kraftform Kompakt VDE sets very compact screwdriver combinations, ideal for both stationary and mobile electrical work. The belt pouch is extremely practical, allowing for neat and tidy storage and transport of the tool.

Kraftform

The basic idea behind the original "Kraftform" handle is that the human hand should define the handle's shape, and this has proven correct to this day. Back in the 1960s, the Wera company—in cooperation with the renowned Fraunhofer Research Institute—developed a screwdriver handle specifically designed for the human hand. After a lengthy development period, the Wera "Kraftform" handle was launched in 1968. Since then, it has been continuously improved using modern technologies, but its highly regarded original shape has remained unchanged—because the human hand hasn't changed either.

VDE interchangeable rods tested one by one at 100% with a reduced rod diameter

2 Kraftform VDE ergonomic multi-component handles with anti-roll system

It comes in a sturdy textile case.

With a multifunctional pliers for electrical installations: for cutting cables, insulating, gripping, twisting, deburring, crimping cable ferrules

The pliers include a cable cutter with precision cutting edges (induction hardened) for copper and aluminum cables up to 5 x 2.5 mm² / Ø 15 mm

Interchangeable handle and rod system - Kraftform Kompakt VDE

Individual test

Kraftform Kompakt VDE screwdriver sets have been tested according to IEC 60900, which means testing each piece individually at 10,000 volts. This electrical test, with a load ten times greater, guarantees completely safe operation under the maximum permissible voltage of 1,000 volts.

VDE-compliant insulated screwdrivers with reduced shaft diameter

The reduced diameter of the rod with integrated protective insulation allows for better access, facilitating work on screw and spring elements located in recessed positions; individually tested according to IEC 60900.

PlusMinus Screwdrivers

They are indispensable in work on in-line terminals, fuse boxes, switches, relays, etc.: The professional combination of slot and Phillips, or also of slot and Pozidriv.

Remove the rod

By stretching and holding down the retaining sleeve, the interchangeable rod or distribution cabinet key can be easily unlocked and removed from the handle.

Kraftform Kompakt VDE

The "one handle - many interchangeable shafts" system makes Kraftform Kompakt VDE sets very compact screwdriver combinations, ideal for both stationary and mobile electrical work. The belt pouch is extremely practical, allowing for neat and tidy storage and transport of the tool.

Kraftform

The basic idea behind the original "Kraftform" handle is that the human hand should define the handle's shape, and this has proven correct to this day. Back in the 1960s, the Wera company—in cooperation with the renowned Fraunhofer Research Institute—developed a screwdriver handle specifically designed for the human hand. After a lengthy development period, the Wera "Kraftform" handle was launched in 1968. Since then, it has been continuously improved using modern technologies, but its highly regarded original shape has remained unchanged—because the human hand hasn't changed either.

VDE interchangeable rods tested one by one at 100% with a reduced rod diameter

2 Kraftform VDE ergonomic multi-component handles with anti-roll system

It comes in a sturdy textile case.

With a multifunctional pliers for electrical installations: for cutting cables, insulating, gripping, twisting, deburring, crimping cable ferrules

The pliers include a cable cutter with precision cutting edges (induction hardened) for copper and aluminum cables up to 5 x 2.5 mm² / Ø 15 mm

Interchangeable handle and rod system - Kraftform Kompakt VDE

Item description

14 interchangeable VDE rods (each 154 mm) with reduced rod diameter (item KK 60 i 0.4x2.5 and KK 67 i TX 10 standard rod diameter) to allow access to bolted joints and spring elements located deeper inside, enabling the necessary work. 2 VDE 817 rod holders for Wera VDE interchangeable rods; one Kraftform handle for ergonomic use; all in a robust belt case. Tools individually tested to 100% according to IEC 60900 at 10,000 volts to ensure safe operation at the permissible voltage of 1,000 volts. 1 Knipex electrical pliers VDE 13 96 200; these pliers replace up to 6 individual electrical installation tools: cutting, insulating, gripping, twisting, deburring, and crimping – all with a single tool. With a locking ratchet for a smoother grip. Chrome plating provides enhanced corrosion protection; the multi-component handle wraps are insulated.