8767 C TORX® HF 2 Zyklop 1/2" Drive TORX® Socket Set with Retaining Function, 6 Pieces (8767CHF2)

9710 Foam Storage Container Screwdriver Set 1, 18 Pieces

The power zone

The force zone, with its integrated soft areas near the tip of the rod, allows the transmission of high loosening and tightening torques without losing contact with the screw.

The precision zone

The precision zone located directly above the rod gives the user a good feel for the correct turning angle when performing adjustment work.

A long-lasting foam reservoir; with a two-tone design so that the absence of a tool is noticed very quickly.

High-quality, long-lasting foam tank without chemical evaporation

A perfect fit to facilitate and optimize the removal of the tool from the foam containers

Water and oil repellent, easy to care for and clean

The tool is protected against dirt and impacts.

2 screwdriver chisels for screwing, chiseling, mortising and loosening tightly stuck screws

8 Kraftform Plus screwdrivers with hard zones for high working speeds and soft zones in the handle for high torque transmission

2 Kraftform Plus VDE screwdrivers with insulated shafts for safe work under voltages up to 1,000 volts.

2 Kraftform Micro screwdrivers with rotating capsule for rapid turning movement

2 Stubby short screwdrivers with short shaft for hard-to-reach areas

2 screw clamps (plug-in tool with screw clamping function)

Width x height x depth: without tools 344 x 30 x 392 mm, with tools 344 x 47 x 392 mm

A safe accommodation and a tidy structure at first glance

The tools rest securely on the foam, thanks to the precise contour cuts. The intelligent tool placement allows for economical storage and quick access to the right tool.

Two-tone foam tank

After removing the tool, the second layer of light gray foam becomes visible. This allows for quick identification of the necessary tools.

900 Series – The Chisel Twister

The "screw-chisel" is the ideal solution when you need to do more than just screw. It can be used for screwing, chiseling, mortising, and loosening seized screws and clamps. It features an integrated impact capsule to increase tool life and reduce the risk of chipping. The through-shaft is made of high-quality, high-grade material, ensuring efficient power transmission even when hammering. The optimized, high-toughness and hardness material prevents chipping or breakage of the shaft. The integrated hex key allows you to achieve higher torques when using open-end or box-end wrenches.

Lasertip

Using laser beams, a surface structure with sharp edges is created. Wera's Lasertip grips the screw head like teeth, preventing the screwdriver from slipping out during tightening. Suitable for slotted, Phillips, and Pozidriv screws.

Compact shape

Thanks to the compact shape of the handle as well as its short shaft, Kraftform Stubbies screwdrivers are especially suitable for working in very tight situations.

Kraftform Micro Mango

The screwdriver handle is of a multi-component structure that allows for ergonomically correct work.

The power zone

The force zone, with its integrated soft areas near the tip of the rod, allows the transmission of high loosening and tightening torques without losing contact with the screw.

The precision zone

The precision zone located directly above the rod gives the user a good feel for the correct turning angle when performing adjustment work.

A long-lasting foam reservoir; with a two-tone design so that the absence of a tool is noticed very quickly.

High-quality, long-lasting foam tank without chemical evaporation

A perfect fit to facilitate and optimize the removal of the tool from the foam containers

Water and oil repellent, easy to care for and clean

The tool is protected against dirt and impacts.

2 screwdriver chisels for screwing, chiseling, mortising and loosening tightly stuck screws

8 Kraftform Plus screwdrivers with hard zones for high working speeds and soft zones in the handle for high torque transmission

2 Kraftform Plus VDE screwdrivers with insulated shafts for safe work under voltages up to 1,000 volts.

2 Kraftform Micro screwdrivers with rotating capsule for rapid turning movement

2 Stubby short screwdrivers with short shaft for hard-to-reach areas

2 screw clamps (plug-in tool with screw clamping function)

Width x height x depth: without tools 344 x 30 x 392 mm, with tools 344 x 47 x 392 mm

A safe accommodation and a tidy structure at first glance

The tools rest securely on the foam, thanks to the precise contour cuts. The intelligent tool placement allows for economical storage and quick access to the right tool.

Item description

A long-lasting foam reservoir; the two-tone appearance makes it very easy to recognize if parts are needed; it is suitable for the Tool Rebel workshop tool trolley; it comes with 16 Wera Kraftform screwdrivers (for the workshop, VDE, chisel, Micro) as well as 2 screw clamps.