8 HP Rotary Screw Air Compressor

Characteristics
• Efficiency: The 35 SCFM at 125 PSI rotary screws produce cooler air, increasing volumetric efficiency and reducing moisture buildup in tanks and supply lines.
• Faster recovery time.
• Rotary pump design: The rotary pump will recover the used pressure from the tank faster due to the efficiency of the rotary screw.
• Depending on maintenance, our reciprocating pumps are designed to operate between 5,000 and 10,000 hours, while our rotary screw compressors are designed to operate between 20,000 and 40,000 hours.
• Single-piece screw/sump housing.
Our competitors use a two-piece housing with an oil filter/air separator screen sandwiched between the screw and the sump housing, resulting in costly, periodic service calls. No service contract is required since the oil filter, air filter, oil/air separator cartridge, and oil can all be serviced in the field. Competitors require service contracts for compressor maintenance during the warranty period.
• Durable ASME® powder-coated tank finish reduces rust and provides supply line versatility
• Versatile single-phase electrical power of 208/230 V; 40 amp supply
• Hour meter to track service intervals
• Vibration pads for the tank legs to prevent floor movement (no need to bolt the compressor to the floor)
• Control panel, power light, auto cycle/constant on/off switch and oil temperature gauge
• Built-in coolers, integrated air and oil discharge after the cooler
• PLC controlled and notifies when service is needed
• TEFC (Totally Enclosed Fan Cooled) engine keeps contaminants out of the engine
• Operates quietly at 66 dB at 6 feet
• Versatility: 208/230 V Single Phase. Some shops have low voltage requiring a special compressor from our competitors. Snap-on® has the capability to build 208/230 V or 460 V three-phase compressors. Specifications: Automatic Tank Drain: No; Magnetic Starter: Yes; Air Delivery: SCFM @ PSI: 35.0 @ 125; Max. PSI: 144; Pump Stages: Screw; Electrical Requirements: 208/230 V, Single Phase; Country of Origin: ITA; Tank, gal: 73; Hour Meter: Yes; Amperage Requirements: 40 @ 208/230 V; Horsepower, HP: 8; Tank Style: Horizontal; Warranty: Vendor Repair Center, warranty varies by vendor, vendor repair or replacement, product that can be repaired at a vendor repair center. Application Information: Capability to operate a 2- to 3-technology body shop or a 3- to 4-technology auto shop. Warnings: For complete warning information, see pages W1-W4 of CAT1600. WARNING: This product can expose you to chemicals, including lead and lead compounds, known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov