Portable MIG welder 135 A

Characteristics
• The 135A wire feed MIG welder welds up to 3/16" in a single pass
• Uses seven heat settings to weld from 24 gauge to 3/16" thick steel
• Variable wire speed control
• Compact and portable for use in the workplace
• Capable of welding with 0.023-0.035" wire, as well as 0.035" flux-cored gasless wire
• The MIG torch is 9 feet long
• Compact and portable for use on the job site Specifications Wire size, inches (mm) 0.023 – 0.035 (0.58–0.89) Spot welding time (sec) N/A Shipping weight, lb 71 Dimensions, inches (W x D x H) 13 x 19 x 18-1/4 Warranty* 2 years Voltage settings, MIG/TIG 7/— Spool gun ready No Gas purge for spot welding No Welding capacity, inches 3/16 Country of origin ITA Arc voltage, V DC 15–18.3 Input voltage 115 VAC, 50/60 Hz 1 hp Ground cable length, feet (m) 8 (2.4) Welding capacity, single pass, inches 3/16 Weight, lb 67 Detachable feeder No Spot welding No Gas flow meter regulator Regulator Input cable length Power supply, ft (m) 6 (1.8) Cable speed, in/min 50/500 Remote feeder input voltage (VAC) N/A Open circuit voltage, DC 16–24 Max output amps 135 Torch length, ft 9 Input amps (recommended) 20 Torch neck angle 60° Power cord length, ft N/A Duty cycle rating 20% ​​at 90° Welding current range (amps) 30–135 Repair parts warranty Vendor repair center, warranty varies by vendor, vendor repair or replacement, product that can be repaired at a vendor repair center. Application Information Snap-on® MIG welders can be used in direct polarity with shielding gas or reverse polarity without shielding gas for flux-cored wire. The MIG135 is compact and portable for use on the job site. Warnings For complete warnings information, see pages W1-W4 of CAT1600.